This listing is for one connector unless stated, choose after winning. None of these need any soldering, they are all clip on or screw on connectors.

Connectors 1, 2 and 3 come in either 8mm or 10mm. 8mm is for the 3528 strips 10mm is for the 5050 type strips

1. Clip on connector no soldering with wire, can be used for 90 deg bends or going over objects. 8mm for 3258 strip lights 10mm for 5050 type strip lights

2 Clip on connector no wire for joining strips together 8mm for 3528 type strips 10mm for 5050 type strips

3 Female DC connector clip on no soldering needed Great for when you want to cut your strip lights and supply power to the part you have cutoff. 8mm for 3528 type strips 10mm for 5050 type strips;

1. RGB Clip on connector for 10mm changing colour strip lights.

5 RGB Clip on connector with 10cm wire for 10mm changing colour strip lights with wire

6 Male DC connector with screw terminals on the back Center hole for 2.1mm pin Outer diameter of pin 5.5mm

7 Female DC connector with screw terminals on the back Center hole for 2.1mm pin Fits Outer diameter of pin 5.5mm

8 5x Silicon clips, great for use when mounting the 5050 or rgb strip lights to a surface where the sticky tape will not hold. You will get five silicone clips per order.

9 5050 10mm strip connector with wire, Connector on one end only You will get 2 of these for the price of the auction.

These are all designed to be used with my selection of changing colour strip lights and static colour 5050 and 3528 strips.

For similar products, please visit our Trade Me store - LED BULBS NEW ZEALAND