Lian Li Lancool 216 Tempered Glass RGB E-ATX Case Black . Mid-tower chassis configurable for air cooling and water cooling . Airflow optimised front, top and PSU shroud side mesh panels . Supports 360 radiator at the top, front and a maximum of 10 fans . Includes rear PCIe fan bracket . Front I/O that can be relocated to the bottom The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimised for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximise airflow.

CONTINUOUS FRONT TO TOP MESHTo ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud's side*. The front mesh extends to the top for a continuous mesh panel.

2 x 160MM FRONT FANS AND 1 X 140MM REAR FAN INCLUDED LANCOOL 216 RGB FANSThe included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header.

Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.

AIR COOLING Set higher, the motherboard leaves room above the PSU shroud for wider fans.

WATER COOLINGSet lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.

FRONT I/O CAN BE RELOCATEDIncluding a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel

HARDWARE COMPATIBILITYThe LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180o). In addition, thanks to its symmetrical de...