U-Beaut lathe Friction polish 250ml For woodturning on a lathe Available in 250ml $45.95 and 500ml $68.95 Works a treat on Pens as it is a hard wearable surface On most work use the following grit papers. 180, 240, 320, 400, 600 & finer if desired. On pens and other items that will be handled and closely inspected use 600, 800, 1000, 1200 and even finer if desired. Best results will always be obtained by sanding to 1200 grit and above. When you have finished sanding apply Shellawax as follows: FOR SMALL SPINDLE WORK (under 10mm, (3/8") diam) Moisten a small section of clean soft cloth with Shellawax and apply directly to the work with the lathe spinning on high revs. Keep a heavy pressure on the work and slowly move the rag over the entire surface of the timber until you have attained a high shine. (approx. 15 seconds) If you are using very dry or porous timber you may need to apply the Shellawax with the lathe stopped then continue as above. Timberlywoodturning We carry the Full range of U-beaut products EEE. Ultyra glow 250ml $38.95 Shella Wax cream 300 ml $55.95 Shella wax Glow 500ml $68.95 Traditional wax 250m 26.95 For more information on U Beaut Polishes - visit http://www.ubeaut.biz See our other listings for an extensive range of pen kits and wood turning tools