U-Beaut Aussie OIl 1 x 250ml bottle This is an oil type finish similar to Danish oil but nothing like it. This product is designed to be hand rubbed on to raw timber, giving a finish with a hard, bright, high gloss. It will bring out amazing depth and brilliance to most timbers making the grain pop and become opalescent, vibrant, shimmering and alive. Especially when used on a fine grained, highly figure timber. And if that's not enough it dose it all in a matter of minutes. Aussie Oil is ideal for use on most small items like pendants, brooches, earrings, small turned items that cannot be fully finished on the lathe. Pens, magnifying glass handles, compacts, key rings, letter openers, in fact almost anything made of wood you can comfortably hold in your hand to polish.As an extra added bonus, it also works brilliantly as a friction polish on the lathe. Using this finish is simplicity in itself, the following will guide you through applying and polishing your work piece. INSTRUCTIONS For use on small objects as a hand rubbed finish. Sand the timber through the grits up to at least 800 grit, higher for a more brilliant shine. Get a piece of clean soft cloth. Brushed flannelette sheeting is ideal as it has no grain in the material to mark or scratch the surface of the polish . Drape a single layer of the sheeting over the end of your index finger & pull it tight to make a pad on your finger tip (like your mum used to do to wipe dirt from your face).

Shake mixture vigorously until it mixes to a creamy colour, then add a small drop to the pad on your finger, making sure there is just enough to cover the entire surface of the piece you intend to polish, add another drop or two more if you need it. Timberly woodturning U beaut Shella wax EEE Bee kind waxes Sanding sealer Teknatool Lathes and accessories