Full Remote Control

Ford BA/BF Falcon Territory SX/SY/Ute/Wagon 02-10 Remote Control 3 Button

Keypad is Complete Unit Including All Internals/Battery and it is Ready to be Programmed and Used Straight Away.

Compatible with the following models between 2002 and 2010:

• Falcon BA/BF
• Fairmont BA/BF
• Fairlane BA/BF
• XR6
• XR8
• Territory SX/SY
• FPV
• Utes & Wagons

If your current remote looks the same as this one it will work.

Package Includes:

• 1 x Ford Remote

Program Instructions:

1. Sit in the car with your keys and remotes ready
2. Close the driver side door
3. In less than 10 seconds of closing the door, insert the key into the ignition and turn the key to the first click (accessories position) which will turn on the radio
4. In less than 3 seconds of turning the key, press the rear demist button 3 times
5. If done correctly, the door locks will cycle. If the door locks do not cycle, start the process again and try completing the steps faster or slower.
6. Once in learn mode all existing remotes will be deleted from the cars memory. Click any button on the remote until you hear the door locks cycle. Once the locks cycle this confirms the remote has been accepted into the cars memory
7. Repeat the last step for each remote (if you have more than one)
8. Once you have finished your last remote remove you key from the ignition and test that all remote controls work. We recommend you test every button on the new remote to ensure they are all working.