Here at Flexiroof we make beautiful and durable shelter for the naked decks and patios of NZ, and we have been asked for several years to make a spa shelter ... So here it is!

Installation took 68 minutes for 2 people but allow 2-3 hours!

We have made our new 3.1 x 3.1m Kermit design generous for a spa so that it can be used for a dining table shelter/entrance way as well.

The kit is complete with 3mm polycarbonate, all fasteners to connect to a timber deck (or concrete patio), and features 4 posts, mailto:2@2.0m and mailto:2@2.1m so that you can create a fall of ~2degrees

The aluminium, polycarbonate and fasteners are the same as we use in shelters - that cost $3600 for this size, without posts ... so you can see than Kermits at $2950 - for the first 5 sold - including 4 posts is a great price!

Please note that whilst all our house shelters ordered in 2017 will come with LED lights - Kermits do not have LEDs and the posts are 50x50mm as opposed to our regular heavier 75x75mm posts.

Options:

1. Roof beam/structural gutter colours that are standard are Matt Ironsand, or Matt Titania, but at 10% if you want any standard Dulux colour.
2. Posts are Matt Titania or Matt Ironsand at your preference.
3. The polycarbonate sheet can be our standard grey, or light grey ( Note: We have no other sheet colours).

You can let the water fall from the open gutters, or for an additional $90 we can include a dropper for a down pipe and 4 end caps for the gutters.

Please note: Kit delivery/collection is early Feb.

The first images here are of a kermit in Matt Titania, attached to a deck - by at least 2 fasteners at EACH of the castings - but any 2 is ok!

The following 10 photos are for guidance as Kermits can be attached to a house on one side but we give no advice here, so the photos are merely to give you ideas. Other than those pics - for Kermits - we leave that house connection design AND parts entirely to you. (In that scenario you will most likely use a pair of 2.1m posts only.)

Happy holidays!