A flexible, compact Active Direct box, with normal High Impedance input as well as a separate speaker level input for connection to an aux speaker output on the back of instrument amplifiers. Heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and slip resistant rubber pad. Features include -20 dB Pad and Audio Ground Lift switches, plus Phantom or 12V DC power options. Security features include Kensington(R)-type computer lock slot and optional bracket kit for under-table mounting. Specifications:

Max Input Level:

+12 dB Phantom powered, +8 dB using 12 VDC Power Supply.

Input Impedance:

1 Meg Ohm

Max Output Level (nominal):

+12 dB 10K Ohm load using Phantom power +11 dB 600 Ohm load using 12 VDC Power Supply

Output Impedance:

680 Ohms Balanced

Output Signal to Noise:

-100 dB unweighted, -104 dB A weighted

Dynamic Range:

112 dB 10K Ohm load using 12 VDC Power Supply

Distortion:

@100 Hz 0.0025%, @1KHz 0.0026%, @10KHz 0.0033%

Frequency Response:

20Hz to 20KHz, 0.2 dB

Gain through Unit:

6dB (Normal input, Pad switch out)

Power Requirements:

48V Phantom power on XLR pins 2 and 3; 12-15V DC from external supply

Pad Switch:

-20 dB attenuation

Speaker Input:

-40 dB attenuation, equivalent to 100:1 decrease in input level. -60 dB attenuation available when Pad switch also enabled

Input Connectors:

Insulated jacks

Output Connector:

3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold. Audio Ground (Pin 1) lift switch fitted

Construction:

All-steel powdercoated chassis, fibreglass PCB

##-