Another iconic Australian aircraft returns from a 1960's design by George Hahn, with our Laser Cut Short Kit of the Victa Airtourer 115.

To quote the designer, "If you want a full scale model that flies just the way you wished all your planes would fly, this is it! The plane grooves so nicely I have been putting off a temptation to build a duplicate or two for my everyday flying. Try one and see if you agree."

The original plan shows a foam core wing, but we have re-drawn the wing plan sheet and included conventional ribs & spars for a lighter and strong wing.

The kit does not include a vacuum formed canopy, but the designer offers some instructions on how to form your own.

Specifications:

• Wingspan: 58" / 1473mm
• Number of channels: 5
• Recommended engine size: 60 two stroke, 75 four stroke or electric equivalent
• Includes full sized rolled plan and the original construction article

Materials Required For Completion:

• 1.5 x 75 x 915 Balsa Sheet x 2
• 2.0 x 100 x 915 Balsa Sheet x 12
• 2.5 x 100 x 915 Balsa Sheet x 5
• 9.5 x 75 x 915 Balsa Sheet x 1
• 2.5 x 6.5 x 915 Balsa Sticks x 8
• 6.5 x 6.5 x 915 Balsa Sticks x 12
• 6.5 x 6.5 x 915 Spruce Sticks x 4
• 5.0 x 12.5 x 915 Trailing Edge x 2
• 12.5 x 12.5 x 915 Triangle x 1
• 9.5 x 9.5 x 300 Engine Bearer x 2
• 9.5 x 12.5 x 300 Engine Bearer x 2 (Additional wood pack cost $190.40)

At Hangar One we are thrilled to produce a range of laser cut short kitsets of some classic designs.

Our laser cut short kits include all of the shaped parts in balsa and ply which would normally require the builder to cut them from sheets. Items such as formers, wing ribs and other shaped pieces are all precisely laser cut. This leaves you to purchase only the sticks, spruce or balsa sheets you need to complete the kit, some of which you may already have on-hand.

• Note that the picture of the complete aircraft is indicative of it's completed appearance. The kitset requires building and supply of all finishing materials & hardware.