The Flexible Adhesive Base is suitable for mounting to flat or curved surfaces*

Using a super secure 3M(TM) Adhesive, the Flexible Adhesive Base has 4 tabs which can be bent to match the curved surface.

A 10mm Spacers and x2 Screws (1 x M5x30 and 1 x M5x45) are supplied for connecting the spacer to a Quad Lock 360 HEAD or ARM.

1 x Flexible Adhesive Base 1 x 10mm Spacers 1 x M5x30 screw (for connecting Spacer to Lever Head or 360 Arms) 1 x M5x45 screw (for connecting Spacer to Weatherproof Wireless Charging Head) 1 x Isopropyl Alcohol Wipe

Made from tough, nylon construction, the Flexible Adhesive Base is 60mm x 60mm with a height of 18.3mm.

Each tab is 28mm wide and has 2 grooves, which are the bending points to allow grip to curved surfaces. These can be used in a concave or convex manner.

The adhesive used is the renowned, 3M(TM) Adhesive for extra strong grip.

Compatible with all Quad Lock 360 ARMs and HEADs.

Please Note: We recommend thoroughly cleaning the surface before applying the Flexible Adhesive Base with an alcohol-based cleaning substance.

The Flexible Adhesive Base can be attached to a number of different flat and curved surfaces, however, it is not intended for severely curved surfaces (eg. 180 degrees).

The 3M(TM) VHB Adhesive will adhere to smooth, non-textured, non-porous surfaces such as:

• Un-coated Glass (eg. windshield)
• Plastics such as PC, ABS, PVC, Nylon, Acrylic (eg. plastic car dash, console)
• Metals
• Fibreglass
• Sealed wood

It is not recommended for the following substrates:

• Rubber, TPU, TPE
• Leather
• Silicone
• Soft touch coating or paint
• Low surface energy plastics such as Polypropylene (PP), Polyethylene (PE), Acetal, HDPE
• Unsealed wood

Anything that causes high vibrations or receives constant exposure from outdoor elements. Please ensure the substrate is thoroughly cleaned and dry before applying the Flexible Adhesive Base.

Why buy from Motozone? Fast shipping - 30 day ret...