New and improved, the FMX-22 now uses the same circuit topology as the more expensive Azden mixers. With improved signal to noise ratio and wider frequency response the new FMX-22 is designed for the demanding needs of Professional Videographers. The small, all metal, battery operated (4-"AA") mixer can be attached directly to any flat surface with a supplied hook-and-loop fastener. The FMX-22 has the following features: 2 XLR microphone inputs each with 2 input settings, 2 input level controls, master level control, switchable phantom power and limiters for each input, channel-addressable (L-C-R) Stereo XLR and mini outputs, 5-step LED meters easy signal monitoring, 12V DC input for external power (optional BC-27 power supply), and a 1/4' monitor headphone jack with level control.

All of Azden's FMX mixers have phantom power, switchable on & off for each channel.

Features:

• 2 balanced XLR mic inputs and pan controls
• Switchable 48V phantom power and limiting
• 5-step LED master bus meters
• 2 balanced XLR outputs
• Stereo mini-jack output for DSLR cameras
• Headphone out with level control
• 4x AA battery powered
• Optional A/C adapter

Specs:

• Frequency Response: Main and Unbalanced Output: 20-20,000Hz (+0/-.5dB), Monitor Output: 50-17,000Hz (-3dB)
• Noise Level: Left & Right Channel: -119dBu (A weighted, Input Equivalent Level), T.H.D.: less than 0.005% @ 1KHz (+10dBu output)
• MIC Input Level: LO -21 dBu Gain +58dB max gain, HI -5dBu Gain +42dB max gain
• Monitor Output: 3.5mm Stereo: -4dBu (32 ohm load)(Recommended load 16-100 ohms)
• Maximum Output Level: Balanced Output:+15dBu (5K ohms)
• Unbalanced Output (3.5mm): -20dBu (2K ohms)
• Battery Type/Duration: 4 - AA Alkaline - 15 hours
• Current Drain: 77mA nominal (Phantom Power Off), 118mA maximum (Phantom Power On)
• Phantom Power: Voltage: 48VDC (+/- 1.5VDC)
• Dimensions Size: 53.5H x 145W x 120D mm (2.19 x 5.70 x 4.75 inches)
• We...